Tapio MAKELA

 Tapio_Makela2.jpg Host Laboratory TOSHIYOSHI LAB.
Position in LIMMS EUJO-LIMMS Researcher (VTT)
Main Research Topic in LIMMS

Advanced-MEMS - Large Area THz MEMS Device fabrication by Roll-to-Roll Printing Techniques

Keywords

MEMS, THz MEMS, GHz MEMS, Roll to roll, Printing

Contact

LIMMS/CNRS-IIS (UMI 2820) 
Institute of Industrial Science, The University of Tokyo, 4-6-1 Komaba, Meguro-ku, Tokyo 153-8505, Japan 
Phone:+81 (0)3 5452 6036 / Fax:+81 (0)3 5452 6088

--

VTT Technical Research Centre of Finland 
Tietotie 3, P.O. Box 1000, FI-02044 VTT, Espoo, Finland 
Tel. +358 40 8251703  /  Fax +358 20 722 7012

E-mail tapio at iis.u-tokyo.ac.jp
Download icon_pdf.gifAbstract2014_TH-TM.pdf

Resume

Short resume :
2012-now Actual position
2008-2012 Here
2004-2008 Here
2001-2003 Here

↑Page top

Research Projects in Limms

1- Large Area THz MEMS Device fabrication by Roll-to-Roll Printing Techniques
 
Context :
Metamaterial structures are used for example in the split ring resonator (SRR) MEMS filter arrays. In this work plastic based THz MEMS device with electrical controlling will be realized. Schematic design is shown in Fig. 1. Roll-to-roll suitable manufacturing methods make it possible to develop novel large area applications (such as tunable THz scanner) as well as to lower manufacturing cost in the future.
Novel metamaterial structures for RF, THz and microwave applications exhibiting new behaviors and characteristics have been studied for years. For example technologies for future generation of large and flexible display panels were derived from RF applications.
Objectives & Methods :
Our first manufacturing approach is based on totally inkjet printed device and second approach on combination of inkjet and flexographic printing techniques. With inkjet printing GHz devices have been shown but with combinatorial method also THz will be possible to prepare in the future. This is due to the limitation of achievable linewidths of these methods. Research work is needed to optimize inkjet printing parameters for electrically conductive materials as well as for spacers. Roll to roll suitable manufacturing method based on inkjetting and flexographic printing is shown in Fig. 2. 

Picture1_Tapio.jpg

Fig. 1 Unit cell of a tunable metamaterial THz filer with an electrostatic RF-MEMS capacitor

(picture: Zhengli et al., Toshiyoshi lab).

Picture2_Tapio.jpg

Fig. 2 Roll to roll manufacturing process for future THz MEMS device.

References :
[1] Han, Z, et al., Conference proceedings. IEEE  (2013), 165 – 166, Kanazawa, Japan
[2] Han, Z, et al., Abstract O-T01-0077, 7th Asia-Pacific Conference on Transducers and Micro/Nano Technologies June 29 - July 2, 2014 / EXCO, Daegu, Korea

Main publication List (papers, conferences and patent)

2013

Journals
Conferences

2012

Journals
Conferences

2011

Journals
Conferences

↑Page top

eujo limms